SKF 6218/C3VL0241 深沟球轴承 90×160×30 mm斯凯孚 · 瑞典
深沟球轴承 · 主要尺寸 90×160×30 mm
SKF 6218/C3VL0241 技术参数
| 尺寸 | |
| 孔径 | 90 mm |
|---|---|
| 外径 | 160 mm |
| 宽度 | 30 mm |
| 孔径 | 90 mm |
| 外径 | 160 mm |
| 宽度 | 30 mm |
| 内圈挡边直径 | 112.5 mm |
| 外圈挡边凹槽直径 | 145 mm |
| 倒角尺寸 | 2 mm |
| 性能 | |
| 基本额定动荷 | 101 kN |
| 基本额定静负荷 | 73.5 kN |
| 参考转速 | 8500 r/min |
| 极限转速 | 5300 r/min |
| 属性 | |
| 注油槽 | 不带 |
| 列数 | 1 |
| 定位特征,轴承外圈 | 不带 |
| 孔类型 | 圆柱孔 |
| 保持架 | 冲压钢 |
| 配对布置 | 无 |
| 径向游隙 | C3 |
| 材料,轴承 | 轴承钢 |
| 涂层 | 外圈上的绝缘涂层 |
| 密封 | 不带 |
| 润滑剂 | 无 |
| 补充润滑功能 | 不带 |
| 新产品的指示性碳足迹 | 8.3 kg CO<sub>2</sub>e |
| 挡肩尺寸 | |
| 轴挡肩直径 | 101 mm |
| 轴承座挡肩尺寸 | 149 mm |
| 倒角半径 | 2 mm |
| 数据计算 | |
| 基本额定动荷 | 101 kN |
| 基本额定静负荷 | 73.5 kN |
| 疲劳载荷限值 | 2.8 kN |
| 参考转速 | 8500 r/min |
| 极限转速 | 5300 r/min |
| 计算系数 | 0.025 |
| 计算系数 | 14.7 |
产品说明
- 涂层可保护轴承免受电腐蚀损伤
- 降低由于电流放电造成的润滑剂劣化
- 单列深沟球轴承的典型优势
INSOCOAT single row deep groove ball bearings feature an electrically insulating coating on the outside surfaces of either the inner or outer bearing ring. This keeps stray electric currents from passing through the bearings, protecting them against electrical erosion damage and helping prevent lubricant degradation resulting from electric current discharge. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
尺寸图纸
点击图纸可放大查看,再次点击关闭。
同尺寸其他型号
以下型号与 SKF 6218/C3VL0241 的主要尺寸相同(d 90 × D 160 × B 30 mm),可用于同尺寸替代选型。